PIC10F200T-I/OT Devices Electronic

High-Performance RISC CPU

Only 33 Single-Word Instructions to Learn

All Single-Cycle Instructions except for Program Branches, which are Two-Cycle

12-Bit Wide Instructions

2-Level Deep Hardware Stack

Direct, Indirect and Relative Addressing modes for Data and Instructions

8-Bit Wide Data Path

Eight Special Function Hardware Registers

Operating Speed:

- 4 MHz internal clock

- 1s instruction cycle

Special Microcontroller Features

4 MHz Precision Internal Oscillator:- Factory calibrated to±1%

In-Circuit Serial Programming™(ICSP™)

In-Circuit Debugging (ICD) Support

Power-on Reset (POR)

Device Reset Timer (DRT)

Watchdog Timer (WDT) with Dedicated On-Chip

RC Oscillator for Reliable Operation

Programmable Code Protection

Multiplexed MCLR Input Pin

Internal Weak Pull-ups on I/O Pins

Power-Saving Sleep mode

Wake-up from Sleep on Pin Change

Low-Power Features/CMOS Technology

Operating Current:- < 175A @ 2V, 4 MHz, typical

Standby Current:- 100 nA @ 2V, typical

Low-Power, High-Speed Flash Technology:

- 100,000 Flash endurance

- > 40 year retention

Fully Static Design

Wide Operating Voltage Range: 2.0V to 5.5V

Wide Temperature Range:

- Industrial: -40C to +85C

- Extended: -40C to +125C

Peripheral Features

Four I/O Pins:

- Three I/O pins with individual direction control

- One input-only pin

- High current sink/source for direct LED drive

- Wake-on-change

- Weak pull-ups

8-Bit Real-Time Clock/Counter (TMR0) with 8-Bit Programmable Prescaler